Cables NA2XBY-J(O), АПвБбШв
POWER CABLES 0,6/1 kV
NA2XBY-O(J), Al/XLPE/STA/PVC 0,6/1 kV (Наш аналог АПвБбШв)
Standard: TU U 27.3-23075526-001:2017
Construction:
1 Conductor: aluminum (1, 2 class)
2 Core Insulation: XLPE
3 Belt insulation: PVC
4 Armour: steel tapes
5 Protective sheath: PE
Application:
Cables NA2XBY are intended for transmission and distribution of electric power in fixed installations at rated voltage of 0.66 and 1 kV at 50 Hz frequency or DC voltage up to 1 kV. Installation and operation - in the ground (in trenches) with low corrosivity, where protection is required against mechanical damage without significant tensile forces.
Technical parameters:
- Rated operational voltage: 0.66/1.0 kV
- Range of cross-sections 2.5 – 800 mm²
- Number of cores: 1, 2, 3, 4, 5
- Shape of conductor: round
- Оperating temperatures - of -50 °С to +50 °С
- Conductor temperature: max. +90 °С
- Relative humidity: 98% at 35 °C temperature
- Flame retardant: IEC 60332-1
- Service life: 30 years
Nominal cross-section (mm²) |
Number of cores |
Number of wires in the core |
2,5 – 120 |
1, 2, 3, 4, 5 |
1 |
16 – 95 |
1, 2, 3, 4, 5 |
7 |
120 – 240 |
1, 2, 3, 4, 5 |
19 |
150 - 240 |
1, 2, 3, 4, 5 |
37 |
300 |
1 |
37 |
400-800 |
1 |
61 |
Variants of execution:
АПвБбШвнг: flame retardant - IEC 60332-3 (category A )
АПвБбШвнг-LS: flame retardant - IEC 60332-3 (category A), IEC 61034-2, IEC 60754-1,IEC 60754-2
NA2XВY-J: insulated ground conductor yellow-green
NA2XВY-O: without grounding conductor
АПвПбШв (Al/XLPE/SWA/PVC 0.6/1 kV): steel wire armour
Rate the page "Cables NA2XBY-J(O), АПвБбШв"
- 10.02.2017Foreign counterparts of the cable and wire produced in our factory
- 17.01.2017The warranty period and service life of cables and wires Cable Factory production "Energoprom"