Cables N2XB2Y ПвБбШп

POWER CABLES 0,6/1 kV
N2XB2Y-O(J), Cu/XLPE/STA/РЕ 0,6/1 kV (Наш аналог ПвБбШп)

N2XB2Y cabels

Standard: TU U 27.3-23075526-001:2017

Construction:

1 Conductor: cupper (1, 2 class);

2 Core Insulation: ХLPE;

3 Belt insulation: PVC;

4 Armour: steel tapes;

5 Protective sheath: РЕ.

Application:

Cables N2XB2Y are intended for transmission and distribution of electric power in fixed installations at rated voltage of 0,66 and 1 kV at 50 Hz frequency or DC voltage up to 1 kV. Installation and operation - in the ground (in trenches) with low corrosivity, where protection is required against mechanical damage without significant tensile forces.

Technical parameters:

  • Rated operational voltage: 0,66/1 kV
  • Range of cross-sections 1,0 – 400 mm²
  • Number of cores: 1, 2, 3, 4, 5
  • Shape of conductor: round
  • Оperating temperatures - of -50 °С to +50 °С
  • Conductor temperature: max. +90 °С
  • Relative humidity: 98% at 35 °C temperature
  • Flame retardant: IEC 60332-1
  • Service life: 30 years

Nominal

cross-section (mm²)

Number

of cores

Number of wires in the core

1,0 – 6,0

1, 2, 3, 4, 5

1

10 – 50

1, 2, 3, 4, 5

7

70 – 120

1, 2, 3, 4, 5

19

150 - 240

1, 2, 3, 4, 5

37

300-400

1

61

Variants of execution:

ПвБбШпнг: flame retardant - IEC 60332-3 (category A );

ПвБбШпнг-LS: flame retardant - IEC 60332-3 (category A), IEC 61034-2, IEC 60754-1,IEC 60754-2;

N2ХВ2Y-J: insulated ground conductor yellow-green;

N2ХВ2Y-O: without grounding conductor;

ПвПбШп (Cu/XLPE/SWA/PЕ 0.6/1 kV): steel wire armour.