POWER CABLES NAYBY-O(J), АВБбШв

POWER CABLES 0,6/1 kV
NAYBY-O(J), Al/PVC/STA/PVC 0,6/1 kV (Наш аналог кабель АВБбШв)


 NAYBY cabels

Standard: TU U 27.3-23075526-001:2017

Construction:

1 Conductor: aluminum (1,2 class)

2 Core Insulation: PVC

3 Belt insulation: PVC

4 Armour: steel tapes

5 Protective sheath: PVC

Application:

Cables are intended NAYBY for transmission and distribution of electric power in fixed installations at rated voltage of 0.66 and 1 kV at 50 Hz frequency or DC voltage up to 1 kV. Installation and operation - in the ground (in trenches) with low corrosivity, where protection is required against mechanical damage without significant tensile forces.

Technical parameters:

  • Rated operational voltage: 0,66/1 kV
  • Range of cross-sections 2.5 – 800 mm²
  • Number of cores: 1, 2, 3, 4, 5
  • Shape of conductor: round
  • Оperating temperatures - of -50 °С to +50 °С
  • Conductor temperature: max. +70 °С
  • Relative humidity: 98% at 35 °C temperature
  • Flame retardant: IEC 60332-1
  • Service life: 25 years

    Nominal

    cross-section (mm²)

    Number

    of cores

    Number of wires in the core

    2,5 – 120

    1, 2, 3, 4, 5

    1

    16 – 95

    1, 2, 3, 4, 5

    7

    120 – 240

    1, 2, 3, 4, 5

    19

    150 - 240

    1, 2, 3, 4, 5

    37

    300

    1, 2, 3, 4

    37

    400-800

    1

    61

    Variants of execution:

    АВБбШвнг: flame retardant - IEC 60332-3 (category A );

    АВБбШвнг-LS: flame retardant - IEC 60332-3 (category A), IEC 61034-2, IEC 60754-1,IEC 60754-2;

    NAYВY-J: insulated ground conductor yellow-green;

    NAYВY-O: without grounding conductor;

    АВПбШв (Al/PVC/SWA/PVC 0.6/1 kV): steel wire armour.